- Form: aerosol 400 ml / liquid 25 L
- Composition: silicone-based
- Application: all thermoplastic materials and many types of rubber; injection molding, compression molding, vacuum forming
- Temperature range: up to +200°C
Purpose and Functional Properties of Formula 6
Formula 6 is a universal medium-strength silicone release agent for molding thermoplastics and rubber products. It forms a stable separating film, does not accumulate in the mold, improves surface quality, and enables the production of complex and high-precision parts.
Formula 6 is supplied as a 400 ml aerosol and a 25 L liquid. Equipped with a 360° spray system, it can be used at any angle, including vertically downward. Complies with European regulations (REACH, CLP). Technical Data Sheet (TDS) and Safety Data Sheet (SDS) are available upon request or on the manufacturer's website.
Areas of Application and Typical Tasks
- Molding types: injection, compression, vacuum
- Materials: ABS, TPU, rubber, polyurethane foam, other thermoplastics
- Mold types: complex, textured, high-precision
- Other industries: textile, printing, footwear industry
Advantages in Production Processes
Technological Properties
- Operating temperature: up to +200°C
- Release effect without accumulation in the mold
- Transparent medium-thickness film
- Equipment compatibility: 360° spraying, can be applied upside down
Practical Advantages
- Leaves no spots or marks
- No need to clean the mold
- Reduces defects
- Shortens molding cycle
- Extends mold service life
Limitations and Recommendations
- Contains silicone. Not recommended before painting, varnishing, or bonding of molded parts.
Technical Parameters and Physicochemical Properties
| Parameter |
Value |
| Thermal stability |
up to +200°C |
| Specific gravity (25°C) |
0.723 g/cm³ |
| Can pressure |
3.5 bar |
| Consumption |
0.8 g/sec |
| Residue after evaporation |
none |
| Film color |
transparent |
| Composition |
silicone-based, C7 hydrocarbons, ethanol, methanol (<1%) |
Criteria for Choosing a Release Agent
- Choose this product if:
- You work with thermoplastics and rubber at temperatures up to 200°C
- You need precise detailing and clean release
- It is important to avoid cleaning the molds after the cycle
- Do not choose if:
- Painting, varnishing, or bonding of parts is planned → Alternative: Formula 4 or Formula 7
