What does the NSF sign mean on the packaging? (part 2)

Continuation

Table 2. Non-food compounds

Absorbents / anti-slip agents

J1

General Purpose Products

JX

The ingredients and ingredients of such products

Solvent / solvent based purifiers

K1

Cleaners for areas related to product processing

K2

Cleaners for electronic devices

K3

Solvent / solvent based purifiers

KX

The ingredients and ingredients of such purifiers

Розділові агенти

M1

The ingredients and ingredients of such purifiers

Dehumidifying agents

N1

Drying agents for all areas in the food industry

Sewage and sewer pipe cleaners

L1

General Purpose Cleaners

L2

Enzyme cleaners

LX

The ingredients and ingredients of such purifiers

Mixed category

P1

Products for use in or near the food processing area

PX

The ingredients and ingredients of such products

Egg shell based products

Q1

General Purpose Cleaners

Q2

Bleaching agents

Q3

Egg shell based products

Q4

Chlorine disinfectants

Q5

Means for control of foaming

Q6

Iodine disinfectants

QX

Ingredients and ingredients for such products

Coating

R1

Coatings for surfaces in contact with food

R2

Coatings for structural surfaces

RX-1

Ingredients and components of coatings R1

RX-2

Ingredients and components of coatings R2

Table 3

Tolerance

А 1

Acceptable for use as a general cleaner on all surfaces in and around food processing areas,

where its use is not intended for direct food contact. All food products and packaging materials must be removed or protected prior to product use. After use of this product,

surfaces should be rinsed with potable water. The cleaner should not exhibit a noticeable

odour nor leave a visible residue.

A7

Acceptable as a metal cleaner and polisher for non-food contact surfaces (A7) in and around

food processing areas. All food products and packaging materials shall be removed or

carefully protected prior to usage. This compound must be used in a manner so that all odours associated with the compound are dissipated before food products or packaging materials are re-exposed in the area

A8

Acceptable for use as a degreaser or carbon remover for food cooking or smoking equipment, utensils, or other associated surfaces in and around food processing areas, where its use is not intended for direct food contact. All food products and packaging materials be removed or protected prior to product use. A potable water rinse of cleaned surfaces is required after use of this product.

C1

Acceptable for use in inedible food processing areas, non-processing areas and / or outside food processing facilities of an establishment, provided that it is not used to mask odors resulting from unsanitary conditions and that any characteristic odor or the aroma does not penetrate the edible area of the product. When used on equipment that will be returned to the food processing area, the Product must be completely rinsed and washed with drinking water before returning to the processing area.

D2

Acceptable for use as a sanitiser on all surfaces not always requiring a rinse in and

around food processing areas. Before using this compound, food products and packing

material must be removed from the room or carefully protected. A potable water rinse is not

required following the use of this compound on previously residue remains which can

adulterate or have a deleterious effect on edible products.

3H

This product is acceptable for use as a Release Agent on grills, ovens, loaf pans, boning benches, chopping boards, or other hard surfaces in contact with meat and poultry

food products to prevent food from adhering during processing.

M1

This product is acceptable for use as a mould release agent on moulds that are used to

produce packaging material that will contact food to prevent the finished product from

adhering to the mould. The amount used on the equipment should be the minimum required

to accomplish the effect.

H1

This product is acceptable as a lubricant with incidental food contact for use in and around

food processing areas. Such compounds may be used on food processing equipment as a

protective anti-rust film, as a release agent on gaskets or seals of tank closures, and as a

lubricant for machine parts and equipment in locations in which there is a potential exposure

of the lubricated part to food. If used as an antirust film, the compound must be removed

from the equipment surface, leaving the surface effectively free of any substance which

could be transferred to food.

H2

Acceptable as a lubricant where there is no possibility of food contact (H2) in and around

food processing areas. Such compounds may be used as lubricants, release agents, or

antirust films on equipment and machine parts in locations in which there is no possibility of

the lubricant or lubricated part contacting edible products.

К1

This product is acceptable for use as a cleaner and degreaser for use in non food processing

areas, which are used to remove oil, wax, resinous materials, or other substances not

removable by using acidic or alkaline cleaning agents. Their use is limited to non-processing

areas where there is no possibility of solvent vapours entering a processing area. Food

processing equipment or utensils treated with such preparations must be washed with an

acceptable detergent solution and thoroughly rinsed with potable water before returning to a

processing area.

К2

This product is acceptable for use as a solvent for cleaning electronic instruments and

devices, which will not tolerate aqueous cleaning solutions in and around food processing areas, where its use is not intended for direct food contact. Before using this compound, food products and packaging materials must be removed from the area or carefully protected. This compound must be used in a manner so that all odours associated with the compound are dissipated before food products or packaging materials are re-exposed in the area.

К3

This product is acceptable for use as an adhesive or glue remover, for removing

adhesive or glue from food packaging materials in and around food processing areas,

where its use is not intended for direct food contact. Before using this compound, food

products and packaging materials must be removed from the area or carefully protected.

After using these compounds, all surfaces must be thoroughly washed with an acceptable

detergent solution, and rinsed with potable water. This compound must be used in a

manner so that all odours associated with the compound are dissipated before food products

or packaging materials are re-exposed in the area.

P1

For Universal Screen Cleaner: This product is acceptable for use as a TFT, LCD and plasma

screen cleaner, in and around food processing areas. The products must only be used in such

a manner as to ensure it will have neither direct nor indirect contact with food or potable water.

×
Find out the price
Your name:*
Phone:
E-mail: *
×
Login
×
×
Cообщить когда появится
Ваше имя: *
Email: *
×
Request a call
Your name:*
Your phone number:*
I agree with the privacy policy and I agree to the processing of personal data.

Request has been sent. We will call you back.

×
×